Galaxy II Operating Manual A3
On the Machine to Receive the Update:
4. Select HARDWARE TEST/SOFTWARE UPDATE
MENU.
5. On the next menu: Select HARDWARE TEST/SOFT-
WARE UPDATE MENU again.
6. Select RECEIVE RS-485 UPDATE. Set the speed at
which the update will be received.
On the Machine to Send the Update:
7. Select HARDWARE TEST/SOFTWARE UPDATE
MENU.
8. On the next menu: Select HARDWARE TEST/SOFT-
WARE UPDATE MENU again.
9. Select SEND RS-485 SOFTWARE. Adjust the speed to
match that set in step 6 above. When the update is fin-
ished, reboot the machine that received the update and
press the test button. If a BOOT FLASH update was
sent, answer yes to update the boot software.
Repeat steps 3 through 9 on the remaining Galaxy II
machines in the network that need to be updated. When
finished reboot all machines to resume normal opera-
tion.
Note: Only one machine on the network can be
updated at a time.
Port-A-Flash
All information pertaining to the Port-A-Flash can be
found either in the Dartman for Windows manual or the
Port-A-Flash manual that was included with the Port-A-
Flash device.
