A SERVICE OF

logo

Page 20
INSTALL WEIGHT HORNS:
1. Take the (4) Long Weight Horn weldments (PN:731-1454), (4) Short Weight Horn weldments
(PN:731-2297), (12) Weight Horn Covers (PN:731-1376), (12) Base Covers (PN:731-1373), and (12)
End Caps (PN:731-1374) from the packaging.
2. Using (16) M8 x 75mm Hex Head Bolts (PN:731-2356), (32) M8 Washers (PN:731-2421), and (16)
M8 Nyloc Nuts (PN:731-2422) install the weight horns. See image below for placement and order.
Use (2) 13mm box wrenches to tighten fasteners.
3. Once all the weight horns are installed, slide on each side the Base Covers then the Horn Sleeve,
and last the Horn Cap.
4. Once all the caps are installed take the number sticker and apply them to the appropriate cap (see
below). NOTE: the sticker page has both LBS and KG, decide which units you want and then apply
the appropriate stickers.
45lbs
or
20kg
35lbs
or
15kg
25lbs
or
10kg
10lbs
or
5kg
5lbs or
2.5kg
2.5lbs
or
1.25kg