A SERVICE OF

logo

Architectural Series
BPS-1 IN-CEILING SUBWOOFER
I NSTALLATION M ANUAL
Connecting the Vent Tube and Adaptor Baffle
1. Use a Phillips screwdriver to remove the four screws that attach the paint shield to the Architectural
Series Panel Bracket (see
Figure 7)
.
2. Feed several inches of the Vent Tube through the Panel Bracket’s speaker opening (see
Figure 8
).
3. Fit the Vent Tube Clamp (included with the Adaptor Baffle) loosely around the vent tube (see
Figure 9
).
4. Insert the Adaptor Baffle’s neck into the Vent Tube opening (see
Figure 10
).
Insert Adaptor
Baffle Neck
Into Vent Tube
Fit Clamp
Onto
Vent Tube
Figure 9: Fit the Clamp Onto the Vent Tube
Figure 10: Fit the Adaptor Baffle Neck Into the Vent Tube
Page 4 of 8
B6R
Sonance Architectural Series
5/8”
DRYWALL
WWW.SONANCE.COM
800.582.7777
Remove
Screws
Figure 7: Remove Panel Bracket
Paint Shield
Figure 8: Pull End of Vent Tube
Through Opening in Panel Bracket