Sharp XE-A147 Manual

A SERVICE OF

next previous

70

EJ REPORT READING AND RESETTING

The cash register provides an electronic journal (EJ) function. This function is intended to record the journal data

in a memory instead of journal paper, and print the data as an EJ report. The register records the journal data in

REG,

, X/Flash, and Z/PGM modes. By default, a maximum of 3000 lines are stored in the memory. For

details of EJ programming, please refer to “Other programming (Job code 68)” on page 58.

■

Printing journal data on the way of a transaction (temporary EJ printing)

You can print journal data of a current transaction recorded in EJ memory by pressing the

R

key during the

transaction.

NOTE

 ThisfunctionisvalidwhenthereceiptON/OFFfunctionissettoOFF.Forchangingthesetting,referto

“AdditionalInformationforBASICSALESENTRY”onpage29.

• Sample report

■

Reading and resetting the electronic journal data (Issuing EJ report)

You can read the journal data stored in the EJ memory in the journal format by executing the following procedure

in the X/Flash or Z/PGM mode.

To reset all of the data: (Z/PGM mode)

A

To read the last 10 records: (X/Flash mode)

To read all of the data: (X/Flash mode)

A@

@

A@

700

700

710

• Sample EJ report

Header

information

print

NOTE

 •Byprogramming,youcanalsoissueanEJ

Zreportwithoutprintingthejournaldataon

it.Referto“Otherprogramming”(Jobcode

68)onpage58fortheprogramming.

 •Tostopreadingorresettingthedata,press

the

E

key.Thedatawillnotbeerased

whenresetting.

 •OntheEJmemory,amaximumof3000

linesofdatacanbestored.Whenexecuting

alldatareading,allofthedatastoredinthe

EJmemorywillbeprinted.