63
Assigning the drawer number to the drawer for foreign currency
You can assign a number of the drawer which opens when one of the following operations is performed.
• One of
[
through
”
is pressed without any entry.
• A transaction is completed with a payment entry of foreign currency.
• An X/Z report is issued.
*Drawer no.:
0: Inhibit (No drawer opens.)
1: Drawer no. 1
2: Drawer no. 2
To perform this programming, an optional drawer must be connected with your register.
A limit amount (HALO) of entry (
-
,
r
,
p
)
The HALO limit is in effect for the REG-mode operations but can be overridden in the MGR mode. The HALO
limit is represented by two figures as follows:
*1: Function no.
1: For the
-
key 37: For the
r
key
2: For the
–
key 38: For the
®
key
3: For the
—
key 39: For the
p
key
4: For the
≠
key 40: For the
π
key
*2: AB is the same as A x 10
B
.
A: Significant digit (0 through 9)
B: Number of zeros to follow significant digit (0 through 8)
For example, presetting 13 (10.00) here means that amount entries of up to 10.00 are allowed in the REG mode.
When you press 18, however, the upper limit amount is 999999.99.
2312
.
≈
≈:
;
Function no. AB
To keep the current setting
*1 *2
The current
setting is
displayed.
Direct2312
PGM 2
Note
2680
.≈
2
;
PrintKey operation
2680
PGM 2