
5555
ENGLISH DEUTSCH
Weiterführende Funktionen
Advanced Recording
●
DATE/TIME
✤ The DATE/TIME function works in CAMERA, PLAYER, M.REC
and M.PLAY modes.
✤ The date and time are automatically recorded on a special data
area of the tape.
1. Press the MENU button.
■
The menu list will appear.
2. Turn the MENU DIAL to highlight VIEWER and
press the ENTER button.
3. Turn the MENU DIAL to highlight DATE/TIME.
4. Press the ENTER button to select the sub-menu.
5. Using the MENU DIAL, select the DATE/TIME mode.
■
You can choose to display - the OFF, DATE,
TIME, DATE/TIME
- OFF only
- DATE only
- TIME only
- DATE & TIME
■
To return to the previous menu, highlight the
DATE/TIME in the middle of OSD and
press the ENTER button.
6. To exit, press the MENU button.
Notes
■
The DATE/TIME is not affected by the OSD
ON/OFF (DISPLAY) button.
■
The DATE/TIME will read “- - -” in the following
conditions.
- During playback of a blank section of a tape.
- If the tape was recorded before setting the DATE/TIME in the
Camera’s memory.
- When the lithium battery becomes weak or dead.
■
Before you use the DATE/TIME function, you must set the Clock.
See CLOCK SET on page 39.
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
INITIAL
LCD ADJUST
DATE / TIME
TV DISPLAY
CAMERA
A/V
MEMORY
VIEWER
CAM MODE
DATE / TIME
VIEWER SET
DATE
TIME
DATE&TIME
●
DATE/TIME (Datum und Uhrzeit)
✤ Die Funktion DATE/TIME ist im Aufnahmemodus (CAMERA)
und im Wiedergabemodus (PLAYER) sowie im M.REC- und
M.PLAY-Modus verfügbar.
✤ Datum und Uhrzeit werden automatisch auf einem speziellen
Datenbereich des Bands aufgezeichnet.
1. Drücken Sie die Taste MENU.
■
Das Menü wird angezeigt.
2. Wählen Sie mit dem Menü-Einstellrad die Option
VIEWER aus, und drücken Sie die Taste ENTER.
3. Wählen Sie mit dem Menü-Einstellrad die Option
DATE/TIME aus.
4. Drücken Sie die Taste ENTER, um das
Untermenü aufzurufen.
5. Wählen Sie mit dem Menü-Einstellrad den
gewünschten Anzeigemodus für Datum und Uhrzeit.
■
Sie können zwischen vier verschiedenen
Optionen wählen:
- OFF (keine Anzeige)
- DATE (nur Datum)
- TIME (nur Uhrzeit)
- DATE&TIME (Datum und Uhrzeit)
■
Um wieder zum vorherigen Menü zu wechseln,
wählen Sie die Zeile DATE/TIME (Titel des
Untermenüs) aus. Drücken Sie die Taste
ENTER.
6. Um das Menü wieder zu schließen, drücken Sie
die Taste MENU.
Hinweise
■
Datum und Uhrzeit werden nicht zusammen mit
den Monitoranzeigen ein- und ausgeblendet
(Taste DISPLAY).
■
In folgenden Fällen erscheint anstelle von Datum/Uhrzeit die
Anzeige “- - -”:
- wenn ein Bandbereich ohne Aufnahmen wiedergegeben wird.
- wenn die Aufnahme vor der Einstellung von Datum/Uhrzeit
gemacht wurde.
- wenn die Lithiumbatterie des Camcorders leer ist.
■
Die Funktion DATE/TIME ist erst verfügbar, wenn Datum und
Uhrzeit eingestellt wurden (siehe Seite 39).
00743F VP-D103 UK+GER(28~61) 2/25/04 9:44 AM Page 55