32
Entering Symbols
Enter symbols such as “@” or “%” into a text message.
1. While composing a text message, press the Left soft key,
then select
Symbols
. The first of three symbol screens
displays on the screen.
2. Use the
Prev
and
Next
soft keys to page through the other
symbols, if desired.
3. Press the key that corresponds with the symbol that you
wish to enter.
Example:
Press for an exclamation point (
!
).
4. Repeat these steps to insert additional symbols into your
message.
Entering Emoticons
Enter symbols such as “:)” or “;-)” into a text message.
1. While composing a text message, press the Left soft key,
then select
Emoticons
. The first of two emoticon screens
displays on the screen.
2. Use the
Prev
and
Next
soft keys to page through the other
emoticons, if desired.
3. Press the key that corresponds with the emoticon that you
wish to enter.
Example:
Press for
D
.
4. Repeat these steps to insert additional emoticon into your
message.
Adding Words to the T9 Dictionary
1. While composing a text message, press the Left soft key,
then select
Add T9 Word
.
2. Type the word to add to the dictionary and press .
The T9 word is added to the T9 dictionary.
