Digital Camera User Guide
Digital Camera User Guide
Turn on the camera, set the Mode selector to Auto or Manual. Press the
Flash button to cycle through the ash settings and select the one you
need. When you rst press the Flash button, the LCD screen will turn
black and the Operation LED will blink in red which indicates the ash
is charging. When charging is complete, the icon (according to the ash
setting you selected) will appear on the LCD screen. You can now take
pictures using the Flash mode you selected. The ash will recharge after
Wide: 2.6 ~ 10 feet (0.8 ~ 3 meters)
Telephoto: 2.6 ~ 6.7 feet (0.8 ~ 2 meters)
The camera has four ash modes (default setting is Off). Different ash
setting applied to different situation:
Flash Mode on, the ash res for every picture. Use this
setting in high-contrast situations to provide ll-light or use it
Flash Mode off, the ash does not re. Use this setting
for outdoor pictures or where ash is prohibited or may
be distracting. Also use when shooting toward a re ective
surface, such as a window or mirror. If you do not have enough
light when using this setting, your pictures will be too dark.
Auto Flash Mode, the ash res automatically as needed. Use
this setting to take most pictures.
Red eye, Use this setting to avoid red glare in your subject’s
eyes. The camera res a brief, pre ash ash before the regular
Flash modes are not available in Video mode.
Never touch or block the ash or the exposure sensor with your ngers. Doing
so can soil these components and interfere with the correct ash operation.
Your camera is designed with a self timer function which will allow you
to take pictures with the 2 or 10 seconds built-in timer. Please place the
camera on at surface or use a tripod for the Self-timer function.
Set Mode selector to Auto or Manual.
Press the Self-timer button to cycle through the self-timer setting.
2 SEC. Self-timer indicates a countdown of two
10 SEC. Self-timer indicates a countdown of ten
will appear on the LCD screen when it is selected.
Press the Shutter button to take a picture. The camera starts
is selected, the Self-timer LED (on the front of
the camera) will blink 8 times before the picture is taken. When
selected, the Self-timer LED blinks slowly for 4 times, then quicker
for 8 times and very quick for another 8 times before the picture is
Another beep (if beep is turned on) will sound when the picture is
PDC 3350 US UM .indd 2/18/03, 10:58 AM22-23
