A SERVICE OF

logo

Open as PDF
next previous
8700-A2-GB20-40 May 2002
6-1
6
Security
Overview
The Hotwire Termination Unit in IP Complex mode provides several methods of
limiting user access to the ATI through option settings. You can:
Enable the Telnet Login Required option.
Limit the access by setting a Session Access Level option of Operator for the
Telnet Session.
Disable the access with the Telnet Session option.
See Table A-12, Telnet Session Options, in Appendix A,
Configuration Options
.
For information on configuring user accounts in IP Conservative mode, see the
Hotwire Management Communications Controller (MCC) Card, IP Conservative,
User's Guide
.