A SERVICE OF

logo

Open as PDF
next previous
8700-A2-GB20-40 May 2002
B-1
B
Standards Compliance for SNMP Traps
SNMP Traps
This section describes the unit’s compliance with SNMP standards and any
special operational features for the SNMP traps supported. The unit supports the
following traps:
warmStart
on page B-2
authenticationFailure
on page B-2
linkUp and linkDown
on page B-2
Enterprise-Specific Traps
on page B-4
ifIndex
The object ifIndex is a variable binding for several traps. The following ifIndex
values are supported for Hotwire 87xx TDM SDSL Termination Units:
For a unit defined as an LTU running IP Conservative software or a unit not
running IP Conservative software, all traps have at a minimum a variable binding
of the Overloaded ifIndex (OI). The formula for the OI is:
((LTU Slot Number) * 1,000)
+ ifIndex.
ifIndex Description
3–10 DSL Interface Ports 1–8
15–22 DSX-1 or G.703 Interface Ports 1–8
39–46 EOC Management Link Ports 1–8