1. Installation
1-2 June 2004 4200-A2-GN21-30
GranDSLAM 4200 IP DSLAM models and features are listed in Table 1-1,
GranDSLAM 4200 Models and Features.
Preparation
Consider the following before installing the GranDSLAM 4200 IP DSLAM:
Installation Site
Your installation site should be well ventilated, clean, and free of
environmental extremes.
Installation Options
The GranDSLAM 4200 may be:
— Mounted with the included mounting brackets in a standard 19-inch
(483 mm) or 23-inch (584 mm) rack (including both Bay Networks and
Nortel 23-inch racks), or, with separately purchased mounting brackets, in
a 21-inch (535 mm) ETSI rack. ETSI brackets are available from
Paradyne. See Appendix B, Equipment List.
As many GranDSLAM 4200 units may be mounted in a standard rack as
there are 1.75-inch (44.45 mm) spaces in the rack, so long as adequate
cooling is provided.
— Mounted vertically against a wall.
The standard mounting brackets provided can be fastened to the base of
the unit for wall mounting.
— Set on a shelf or desktop.
Up to five GranDSLAM 4200 units may be stacked on a shelf or desktop.
Different models can be mixed in a stack.
Power
The GranDSLAM 4200 operates from a –48 or –60 VDC power supply to
allow for standard power connections available in a CO. For AC voltage
environments, an external AC-to-DC power converter is required.
Other Cabling
No cables are provided with the GranDSLAM 4200. See Table 1-2, Cable
Descriptions, to determine what cables you need to procure before
installation.
Table 1-1. GranDSLAM 4200 Models and Features
Model Number Type Number of Ports POTS Splitters
4219-A1-520 ReachDSL 24 No
4219-A1-530 ReachDSL 24 900-Ohm
4219-A1-531 ReachDSL 24 600-Ohm
4229-A2-520 ADSL 24 No
4229-A2-530 ADSL 24 900-Ohm
4229-A2-531 ADSL 24 600-Ohm
4279-A1-520 SHDSL 24 No
