A SERVICE OF

logo

8. Testing
8700-A2-GB20-40 May 2002
8-3
Use the
Command
column to start or stop a test. When the
Status
column shows
that a test is Inactive,
Start
is displayed; when a test is Active,
Stop
is displayed.
Position the cursor at the desired Start or Stop command and press Enter. The
Results
column displays the test duration.
Selecting Abort All Tests from the Test menu will not disrupt a Send and Monitor
511 test. When the Send and Monitor 511 test is active, R
esetMon is available to
reset the error counter to zero.