A SERVICE OF

logo

MEC Card Calculation
Calculate the MEC figure from the type and total number of items of equipment to be connected. If the MEC
figure exceeds 64 (for KX-TDA100) or 128 (for KX-TDA200), you need to install an MEC card.
MEC Card Calculation
Equipment Type MEC Figure
PT KX-DT300 series DPT/KX-DT300 series DSS
console/KX-T7600
series DPT/KX-T7600 series
DSS console
1
KX-T7560/KX-T7565 DPT 1
Other DPT/Other DSS console 1
APT 1
IP-PT 1
Extension Card
*1
DHLC8 8
SLC8 8
SLC16 16
CSLC16 16
MSLC16 16
CS (1 unit) 0
PT-interface CS (1 unit) 0
PT-interface CS (High-density) (1 unit) 0
ISDN Extension 0
VPS (1 port) 1
*1
Only the extension cards that can support SLTs count for the MEC figures.
Calculation Example (KX-TDA100)
Equipment Type MEC Figure
KX-DT300/KX-T7600 series DPT 48 units 48
SLC16 1 card 16
MSLC16 1 card 16
VPS 8 ports 8
Total 88
The total MEC figure is 88. As this exceeds 64, you need to install an MEC card for this configuration.
36 Installation Manual
1.4.3 System Capacity