Problem Solving
65
Code Check Points
J19 Paper Feed Section & ADU Section
(See pages 66, 67, 69, and 70)
J82, J83, ADU Section & Fuser/Exit Section
J88 (See pages 67 to 68)
J30-J32, Paper Feed Section & Fuser/Exit Section
J38-J40, (See pages 66, 68, 69, and 70)
J42-J45
J41, J50, Fuser/Exit Section & Paper Transport Section
J51, J52, (See pages 68 to 69)
J86
J80, J81, Fuser/Exit Section
J87 (See page 68)
J54-J56 Paper Transport Section
(See page 69)
J60-J66 Optional Finisher Section
(See pages 71 to 73)
J70-J79, ADF Section
J92-J94 (See pages 74 to 75)
Code Check Points
J00 Sheet Bypass (Remove the misfed paper
and load the paper again.)
J01 Paper Tray 1 & Paper Feed Section (Paper
Tray 1-4 & Sheet Bypass) (See page 66)
J02 Paper Tray 2 & Paper Feed Section
(Paper Tray 2) (See page 69)
J03 Paper Tray 3 & Paper Feed Section
(Paper Tray 2-4) (See pages 69 to 70)
J04 Paper Tray 4 & Paper Feed Section
(Paper Tray 3, 4) (See page 70)
J06, J26 Paper Feed Section (Paper Tray 1-4 & Sheet
Bypass) (See pages 66, 69, and 70)
J07, J08, Paper Feed Section
J09, J27, (Paper Tray 2 & Optional Paper Tray 3 & 4)
J28 (See pages 69 to 70)
J16, J18, Paper Feed Section
J33-J35 (Paper Tray 1-4 & Sheet Bypass)
Verify that the media type selection in the Control
Panel matches the media loaded on the Trays.
Ex:Select “Transparency” when Transparencies
are loaded in the Sheet Bypass.
(See pages 66, 69, and 70)
Jam Error Codes (J Codes)
ATTENTION
● The display indicates the
section of the misfed paper.
Remove the misfed paper
and check to see if the
Misfeed Indicator has been
cleared.
If other locations indicate
presence of paper, remove
them and check the display
again.
● When clearing a misfed
paper that is difficult, or
impossible to see, turn OFF
the machine and contact the
authorized Panasonic
dealer.
Removing a Misfed Paper (Locations)
●When a misfed paper occurs, the location and the procedures for
removing misfed paper are displayed frame by frame on the Touch
Panel Display.
Check the location and remove all misfed papers according to
displayed pictures and this manual. (See pages 66 to 75)
Ex: ADU Section
Returns to the 1st step.
Misfed Location Indicator
Finisher
Section
(Option)
ADF (Automatic Document Feeder)
Section
Paper
Transport
Section
(Option)
Paper Tray 1
Paper Tray 2
Paper Tray 3
Paper Tray 4
Fuser/Exit Section
Paper Feed Section
(Paper Tray 1-4 &
Sheet Bypass)
ADU Section
Sheet Bypass
Paper Feed Section
(Paper Tray 2)
Paper Feed Section
(Paper Tray 3, 4)
(Option)
