46 MPC User Manual Rev 0D
Chapter 5 VFD Menus
maximum). The MPC allows multiple users. Example of clients may be
the administrator who has all privileges, the users who have some but not
all privileges, and guests who have little or no privileges.
• PASSWRD: A password for the above user (8 characters maximum).
• ADMIN: ‘YES’ or ‘NO’ depending on whether this user has or has not
respectively system privileges.
• LOGGING: ‘YES’ or ‘NO’ depending on whether this user has or has not
respectively the right to control logging.
• FTP: ‘YES’ or ‘NO’ depending on whether this user has or has not
respectively access to the MPC’s File Transfer-Protocol (FTP) service.
• STATUS: ‘YES’ or ‘NO’ depending on whether this user has or has not
respectively the right to view the MPC SYSTEM STATUS pages via the
Modulated Precision Clock website, see Chapter 6 starting on Page 49.
See also Status on Page 42.
• SUBMIT: Toggling to YES, and then pushing the <Enter> key, submits
the username, password and privileges to the appropriated configuration
files on the web server.
5.2.4 Configure Ethernet
The CONFIG ETHERNET menu allows you to configure the ethernet or internet connection with the
MPC. Figure 39 shows the CONFIG ETHERNET menu.
Figure 40: Config Ethernet Menu
• CONFIG ETHERNET
• SOURCE: ‘YES’ or ‘NO’ depending on whether or not respectively the
IP address is assigned automatically via a Dynamic Host Configuration
Protocol (DHCP) server on the local network (intranet). If AUTO IP is
changed to ‘YES’, then the IP, SUBNET and GATEWAY rows will be
assigned automatically upon activation and anything in the IP ADDR row
will be deleted.
• IP ADDR: The internet protocol (IP) address.
• SUBNET: The address of the system of interconnections within the
communications system that allows the components to communicate
CONFIG ETHERNET
IP ADDR
SUBNET
GATEWAY
000.000.000.000
000.000.000.000
000.000.000.000
SOURCE AUTO IP:NO
COMPUTER PAT-TEST4
