A SERVICE OF

logo

Instruction Manual Mi455 FREE & TOTAL SULPHUR DIOXIDE Minititrator for wine analysis
88
88
8
STARTUP
Place the instrument on a flat table. Do not place the instrument on direct sun light.
Connect the titrator to mains socket with ground connection and the correct voltage
and frequency. See the label on the instrument rear for this.
Place the peristaltic pump tube on the pump. See the Pump Tube Replacement section
for the procedure.
Remove the reagent bottle cap and place the bottle cap of the tubes set. Place the
reagent bottle in the appropriate place on the titrator top.
Connect the tubes with the peristaltic pump (inlet tube is connected with the reagent
bottle, outlet tube is connected with the dosing tip).
Turn the instrument ON using the power switch from the rear panel of the instrument
and wait until it displays dashes.