•
•
•
•
•
Chapter 1
2
Loading specialty paper
Load up to: Make sure:
10 envelopes • The print side is facing you.
• The stamp location is in the upper left corner.
• The envelopes are loaded
vertically
against
the right side of the sheet feeder.
• The paper guide is against the side of the
envelopes.
10 greeting cards, index
cards, postcards, or
photo cards
• The print side is facing you.
• The cards are loaded
vertically
against the right side of the sheet feeder.
• The paper guide is against the side of the cards.
25 sheets of photo
paper, glossy paper, or
coated paper
• The glossy or coated side is facing you.
• The paper guide is against the side of the photo paper.
20 sheets of banner
paper
• You place the banner paper behind the
printer. Then bring the unattached edge of
the first page over the printer and into the
sheet feeder.
• The paper guide is against the side of the
paper.
Note:
Make sure you select Banner or
Banner A4 paper size in the Printer Properties. For help, see page 5.
10 transparencies • The rough side of the transparency is facing you (smooth side down).
• The paper guide is against the edge of the transparencies.
100 sheets of custom
size paper
• The print side is facing you and the paper guide is against the side of the
paper.
• Your paper size fits within these dimensions:
-Width:
76 mm to 215.9 mm
3.0 in. to 8.5 in.
25 iron-on transfers • You follow the instructions on the packaging to load the iron-on transfers.
• The paper guide is against the side of the iron-on transfers.
- Length
127 mm to 432 mm
5.0 in. to 17.0 in.
