15
VM8113
SETUP MENU
During disc play, press the SETUP button (4) on the remote control to
access the SYSTEM SETUP menu.
Use the , , or cursor buttons to choose between LANGUAGE,
VIDEO, AUDIO, RATING or MISC setup options.
Table 2: System Setup Menu
LANGUAGE MENU
OSD language English Select the appropriate on-screen language for the
DVD.
Francais
Espanol
Subtitle English Choose the language you would like subtitles to
appear in (if available).
French
Spanish
Auto Select subtitle language automatically based on OSD
language.
Off Turn subtitles off
DVD menu English Choose the language you would like DVD menu to
appear in (if available).
French
Spanish
VIDEO MENU
Aspect Ratio 4:3 Image is presented with 4:3 aspect ratio.
16:9 Image is presented in wide view with a 16:9 aspect
ratio.
SETUP MENU
01:02
AM
Language Menu
LANGUAGE VIDEO AUDIO
RATING MISC
Video Format NTSC The color signals are output in the standard NTSC for-
mat.
PAL The color signals are output in the standard PAL for-
mat.
AUTO The color signal output is switched automatically
based on the current video input signal - NTSC or
PAL.
Smart Picture Standard Select preferred display setting.
Bright
Soft
Dynamic
AUDIO MENU
Audio Menu English Select the appropriate audio language for the DVD.
French
Spanish
RATING MENU
Parental CTR 1 KID SAFE Select the appropriate rating level for the intended
audience.
You may override higher ratings by using your pass-
word.
2 G
3 PG
4 PG13
5 PG-R
6 R
7 NC-17
8 ADULT
Set Password _ _ _ _ Enter a 4-digit password to activate the “Rating” fea-
ture. The original password is “0000” and must be
entered before you can change the password to a dif-
ferent 4-digit code.
MISC MENU
Use Default
Settings
Yes/No Select “Yes” to restore the factory default settings for
the Rating system only.
Demo DemoRun Demo Mode scrolls through the various source
screens, simulating activity on the display. “Demo
Mode” is discreetly displayed in yellow text (below the
clock), to indicate the unit is in Demo Mode. To stop
Demo Mode, press and hold the SRC button.
Demo Auto On When “Demo Auto” is On, the unit will automatically
display Demo Mode when powered on.
Off When "Auto Auto" is Off, you can select "Demo >
DemoRun" to start Demo Mode.
Table 2: System Setup Menu
