44 4 - Printer lights reference ENWW
The Power light is on and the
Resume light blinks.
The printer is in manual duplex mode. It is
waiting for the ink to dry so the pages can
be flipped over and reloaded.
z Reload the stack into the printer and
press the (Resume button).
The printer has printed a banner,
and the banner needs to be removed
from the printer.
z Press the (Resume button) to
remove the banner from the printer.
The printer carriage has stalled.
z Open the top cover and remove any
obstructions (such as jammed media).
z Press the (Resume button) to
continue printing.
z If the error persists, turn the printer
off, and then on again.
The Power light is on and the
Resume light and the Paper
Jam light blink.
Print media is jammed in the printer.
z Press the (Resume button) to
eject the jammed media.
z Remove all media from the output
tray. Locate and clear the jam.
See Clearing jams. After clearing the
jam, press the (Resume button) to
continue the print job.
The Power light is on and the
Resume light and the Out of
Paper light blink.
The printer is out of paper.
z Load paper and then press the
(Resume button).
The Power light and the Door
Open light are on.
A cover is not closed completely.
z Make sure all covers are
completely closed.
The Power light is on and the
Door Open light blinks.
The rear-access panel or the auto-duplex
unit is not inserted completely.
z Make sure the rear-access panel
(HP Business Inkjet 1200) or the
auto-duplex unit (HP Business Inkjet
1200d/1200dn/1200dtn/1200dtwn)
is inserted completely in the back of
the printer.
Light pattern Light description Explanation and
recommended action
