A SERVICE OF

logo

Open as PDF
next previous
Overview 1-11
1.3.1 Removing the Front Bezel
The front bezel must be removed to insert or eject a CD.
Figure 1-3 shows how to remove the front bezel from the enclosure .
1. Place a finger in each side tab of the bezel and pull it gently forward to
disengage the bezel from the tabs
on the front of the enclosure.
2. Reverse these procedures to replace the bezel.
Figure 1-3 Removing the Front Bezel
2
3
MR0360
1
3
1.3.2 Inserting or Ejecting a CD
The front bezel must be removed to insert or eject a CD; refer to 1.3.1. When
you are finished using the CD-ROM drive, reattach the front bezel.