Installation Procedures 10
ENWW
2
Installation Procedures
CAUTION HP Jetdirect cards contain electronic
components that can be damaged by static
electricity through electrostatic discharge
(ESD). To prevent ESD damage, maintain frequent
contact with any bare sheet metal surface on the
printer. A grounding wrist strap (or similar device)
is useful for this purpose. Handle the card carefully
at all times. Avoid touching electronic components
or circuit paths.
Verify Printer Operation
To verify that your printer is working properly, print a Printer
Configuration page. The Printer Configuration page will display the
operating status of the printer.
The steps to print a Printer Configuration page varies with each
printer model. For most printers with a control panel, a menu map
is provided to navigate the control panel menus. To print a Printer
Configuration page, see your printer documentation for specific
instructions.
Note The name of the Printer Configuration page may
also vary by printer model. For example, HP
DesignJet printers provide a “Service
Configuration print” that displays status
information.
EIOSG.book Page 10 Thursday, October 9, 2003 1:42 PM
