A SERVICE OF

logo

Technical Data
Technical Data
EP2 Pumps
U.S.
Metric
Maximum Flui
d Working Pressure
125 psi 0.9 MPa, 9 bar
See the EP2 P
ump Repair-Parts manual for the motor/gear
ratiousedo
n your pump:
0.5/51.30
0.75/35.10
Motor Horse
power/Gear Ratio
0.33/157.
43
Maximum P
ump Speed
6 mm: 35 RPM; 13 mm: 50 RPM
Maximum Environmental
Temperature
122°F 50°C
Minimum Environmental
Temperature
14°F –10°C
Maximum
Flow
EP2006 Pump 0.14 gpm 0.5 lpm
EP2013 Pump 0.80 gpm 3.0 lpm
Fluid Capacity per Revolution
EP200
6Pump
0.004
gal.
0.015
liters
EP2013 Pump 0.016 gal. 0.06 liters
Hose Inner Diameter
EP20
06 Pump
6mm
EP2013 Pump 13 mm
Noise
Sound Pressure Less than 80 dB(A)
Dim
ensions
Height 17.20 in. 437 mm
Width with hose installed 11.02 in. 280 mm
Width without hose installed 8.98 in. 228 mm
Length 13.35 in. 339 mm
Weight 51.7 lb 23.5 kg
Fluid Inlet and Outlet Size 1/2 npt(m)
Wetted Parts
Pump Powder coated aluminum.
Hose
See the Parts Matrix in the EP2 Pump Repair-Parts manual.
Barbed Fitting
Stainless steel or Hastelloy. See the Parts Matrix in the EP2 Pump
Repair-Parts manual.
3A1938E 23