6
1. Press the ( + or - ) button to scroll to the Security code
submenu.
. Press button to show the current security code on the
display.
. Use the number keys to enter your new -digit security code.
The default setting is 1 2 3.
. Press button to save the setting.
The charge/in use indicator on the base will ash to alert you to
an incoming call, during paging, or registration. The indicator will
remain lit when a handset is in the base charging or when the line
is in use.
1. Press the button. Dial the desired number.
- OR -
Dial the number rst, then press the button.
. When nished, press the button or put the handset
back into the base cradle to hang up.
1. When the phone rings, press the button.
- OR -
Press the button on the base.
