A SERVICE OF

logo

861
Chapter 41 Up/Down Counter
7.Q&A
7.19 How do I enable (select), disable or clear interrupts?
Interrupt request enable and interrupt request flags
To enable (select) interrupts, use the following interrupt request permission bits:
Count direction change interrupt request permission bits: UDCC.CFIE
Compare interrupt request permission bits : UDCS.CITE
Overflow/underflow interrupt request permission bits : UDCS.UDIE
To clear interrupt requests, use the following interrupt request bits:
For count direction changes : UDCC.CDCF
For compare detection : UDCS.CMPF
For overflow : UDCS.OVFF
For underflow : UDCS.UDFF
Interrupt request permission bits (CFIE, CITE and UDIE)
To disable interrupt requests Set the bit to “0”.
To enable interrupt requests Set the bit to “1”.
Interrupt request bits (CDCF, CMPF, OVFF and UDFF)
To clear interrupt requests Write “0”.