26
This section describes the trouble information of some functions. Read the necessary part.
For the trouble information related to Windows NT, see the Windows NT manual supplied with the
PC and the online help that can be accessed from the "Start" menu.
■ Trouble information related to the PC main body and
peripheral equipment
● The access lamp is not lighted.
The PC may be out of order. Contact a sales person, your local distributor, or your local Fujitsu
Service Centre.
● Nothing is displayed on the screen.
Check the following:
- Check whether the power management mode is selected.
Move the mouse. Alternatively, press any key.
- Check whether the cable of the CRT display is correctly connected.
- Check whether the power cable of the CRT display is connected to an outlet.
WARNING
● When connecting the cable, do so after turning the power off.
Otherwise, an electric shock may occur.
- Check whether the brightness/contrast control of the CRT display is correctly adjusted.
Adjust the brightness/contrast control.
● The image on the screen wavers.
Check whether there is a source of strong magnetic field such as a television set near the PC.
Position the source of strong magnetic field a sufficient distance away from the CRT display.
● The both edges of the screen are cut off.
Using the adjustment button on your CRT display, adjust the horizontal dimension of the screen.
● The floppy disk cannot be read or written.
Check the following:
- Check whether the head of the floppy disk drive is clean.
Clean the head, using a cleaning floppy disk.
- Check whether the floppy disk is write-enabled.
Slide the write protect notch of the floppy disk to the write-enable position.
1 Trouble Information
Electric shock
06Carrol(25-28) 17/06/2000, 13:4926
