A SERVICE OF

logo

23
3 Installing Expansion Card
Installing an expansion card
To install an expansion card, follow the steps below:
1 Remove the side cover.
2 Remove the bracket on the housing opposite to the
empty PCI slot.
3 Install the expansion card on the connector.
Fit the expansion card into the connector firmly.
4 Fasten with the screw.
Fasten the expansion card with the slot cover and its screw
that was removed in step 2.
5 Install the system cover.
Note the following
- Keep the removed slot cover in a safe location for later use.
- To remove the expansion card, reverse the above steps.
05Carrol(19-24) 17/06/2000, 13:4923