A SERVICE OF

logo

Open as PDF
next previous
EPSON EPL-N2700 Rev. A
Chapter 4 Disassembly/Assembly 100
4.2.6 Rear Cover Removal
1. Remove one screw (3541) securing the CN cover to the printer and
remove the CN cover.
2. Remove the Harness Cover.
3. Remove the rear optional cover.
4. Remove three screws (3541) securing the rear cover to the printer.
5. Release the hook securing the Rear Cover to the Paper Eject Cover
and remove the Rear Cover.
Figure 4-17. Rear Cover Removal
4.2.7 Transport Motor Removal
1. Remove the Rear Cover. (See Section 4.2.6.)
2. Remove four screws (3501) securing the Transport Motor to the
printer frame and remove the Transport Motor.
3. Disconnect the harness for the Transport Motor from the connector.
Figure 4-18. Transport Motor Removal