7-14
Maintenance and Transportation
Cardinal U/G
Rev. C
A5 size CHAPTER7.FM
11/6/98 Pass 0
L
Proof Sign-off:
Kimura _______
Nishi _______
Hoadley _______
Handling precautions
❏ When replacing the photoconductor unit, avoid exposing it
to room light any longer than necessary.
❏ Be sure not to scratch the surface of the drum. Also avoid
touching the drum, since oils from your skin can permanently
damage its surface and may affect print quality.
❏ To get the best print quality, do not store the photoconductor
unit in an area subject to direct sunlight, dust, salty air, or
corrosive gasses (such as ammonia). Avoid locations subject
to extremes or rapid changes in heat or humidity.
❏ Keep the photoconductor unit out of the reach of children.
w
Warning:
Do not dispose of the used photoconductor unit in fire, as it can
explode and cause injury.
Replacing the photoconductor unit
1. Turn off the printer.
Note:
When replacing the photoconductor unit, make sure to turn off the
printer.
2. Open the front cover.
