64 en | Configuration Using a Web Browser VideoJet X10
V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems
5.22.9 SSL encryption
The data for the connection, for example the password, can be securely transmitted with SSL
encryption. If you have selected the On option, only encrypted ports are offered in the
Remote port parameter.
You can activate and configure encryption of the media data (video, audio and metadata) on
the Encryption page (see Section 5.30 Encryption, page 83).
5.22.10 Auto-connect
Select the On option to automatically re-establish a connection to one of the previously
specified IP addresses after each reboot, after a connection breakdown or after a network
failure.
5.22.11 Audio
Select the On option if you wish to additionally transmit a standalone G.711-encoded audio
stream with alarm connections.
i
NOTICE!
Please note that the SSL encryption must be activated and configured at both ends of a
connection. This requires the appropriate certificates to be uploaded onto the VideoJet X10
(see Section 5.35.4 Maintenance log, page 92).
i
NOTICE!
Stream 2 is always transmitted for automatic connections. Bear this fact in mind when
assigning the profile (see Section 5.11 Encoder Profile, page 38).
