A SERVICE OF

logo

44 en | Configuration Using a Web Browser VideoJet X10
V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems
5.14 Audio
You can set the gain of the audio signals to suit your specific requirements. The current video
image is shown in the small window next to the slide controls to help you check the audio
source and improve assignments. Your changes are effective immediately.
If you connect via Web browser you must activate the audio transmission on the Livepage
Configuration page (see Section 5.32 Livepage Configuration, page 86). For other connections,
the transmission depends on the audio settings of the respective system.
5.14.1 Line In 1
You can set the line input gain. Make sure that the display does not go beyond the green zone
during modulation.
5.14.2 Line Out
You can set the line output gain. Make sure that the display does not go beyond the green
zone during modulation.