A SERVICE OF

logo

Page 18
724-746-5500 | blackbox.com
Appendix C: Compression Mode
C. Compression Mode
The Multi DVI System features two video compression modes to enable high-
resolution video extension over long distances. Compression modes may be
changed with a simple jumper setting accessible through the front cover. All units
must be set to the same compression mode for proper operation.
The two modes are:
• Pixel Compression mode. Suitable for static non-motion content.
DEFAULT Jumper J10 IN
• Color Compression mode. Suitable for moving content such as DVD movies.
Jumper J10 OUT
To change the compression mode, remove the compression mode jumper access
cover on the front of the Multi DVI unit and remove or install a jumper on J10
underneath.
Figure C-1. Compression Mode Jumper Access cover.