A SERVICE OF

logo

7 Adam Equipment 2010 ©
2.0 INSTALLATION
Please follow the installation instructions to ensure correct operation of your
PTS. In transportation the handle is removed from the truck, this needs to be
installed following the instructions below:
1) Insert the roller pin into the hole of roller rack, securing the handle to the
frame.
2) Fit the split pin through the holes provided.
3) Pass the chain through the center hole of the roller pin. Secure the end of
the chain to the slot on the end of the unloading plate.
4) Remove the transit rod before use. Press the handle down to release any
pressure on the transit rod, then pull the transit rod free.