© Adam Equipment Company 2009
12
automatically.
• This feature is turned off as soon as the number of items added
exceeds the count used as a sample.
6.3.4 Check-counting
• Check-counting is a procedure to cause an alarm to sound when
the number of items counted on the scale meets or exceeds a
number stored in the memory by using the [Pst] key.
• The value to be stored is entered from the keyboard. Enter the
numeric value to be stored using the numeric keys. Then press
the [Pst] key to store the value.
• To clear the value from the memory and thereby turn off the
check-counting feature, enter the value "0" and press [Pst].
6.3.5 Manually Accumulated Totals
• The values (weight and count) shown on the display can be
added to the values in the memory by pressing the [M+] key. The
"Weight" display will show the total weight, the "Count" display
will show the total accumulated count and the "Unit Weight"
display shows the number of times, the items have been added to
the memory for accumulation. The values will be displayed for 2
seconds before returning to normal.
• The scale must return to zero or a negative number, before
another sample can be added to the memory.
• More products can then be added and the [M+] key to be pressed
again. This can continue for up to 99 entries or until the capacity
of the “Weight” display is exceeded.
• To observe the total stored value, press the [MR] key. The total
will be displayed for 2 seconds.
• To clear the memory- first press [MR] to recall the totals from
memory and then press the [CE] key to clear all values from the
memory.
