A SERVICE OF

logo

SET BOOTP POWER_UP_MODE
2-69
SET BOOTP
POWER_UP_MODE
Use the SET BOOTP POWER_UP_MODE command to define whether or not the
DMM issues a BootP request upon power-up.
Format
Example
The following command causes the DMM to issue a BootP request each time it
powers up:
CB5000> set bootp power_up_mode enable
BootP power_up_mode set to ENABLED.
Related Commands
CLEAR BOOTP
SET BOOTP SERVER_IP_ADDRESS
SHOW BOOTP
disable
Configures the DMM to not issue a BootP request upon power-up.
enable
Configures the DMM to issue a BootP request upon power-up.
set bootp power_up_mode
disable
enable