Filter
Top Products
2-1
CLEAR
SET
ON
RDY
CONNECTIONS
1
2 3
4
5
6
7 8
www.wti.com
RSM-8
Remote
Site Manager
1
2
3
4
5
Figure 2.1: Instrument Front Panel (Model RSM-8 Shown)
2. Unit Description
2.1. Front Panel
CLEAR: Restarts the RSM without changing user-selected parameter settings.
Note: When Clear is pressed, all ports will be disconnected.
ON: Lights when AC Power is applied.
SET: Used to Initialize the RSM to default parameters. To initialize the RSM, press
and hold the SET button for approximately five seconds.
Notes:
• During initialization, all port LEDs will flash ON three times.
• After initialization, all command-selected parameters will be cleared, and the
RSM will revert to the default parameters. The default "super" user account
will also be restored.
RDY: (Ready) Flashes to indicate unit is operational.
ACTIVITY LEDs: A series of LEDs, which light to indicate data activity at the
corresponding port.
• RSM-8 units include 8 Activity LEDs
• RSM-16 and RSM-16DC units include 16 Activity LEDs
• RSM-32 and RSM-32DC units include 32 Activity LEDs.