VTech 2 Video Games User Manual


  Open as PDF
of 23
 
16
C
A
R
E
&
M
A
I
N
T
E
N
A
N
C
E
Care & MaintenanceCare & Maintenance
1. KeepyourMobiGo
®
2 clean by wiping it with a slightly damp cloth. Never use solvents
or abrasives.
2. Keep it out of direct sunlight and away from direct sources of heat.
3. Remove the batteries when not using it for an extended period of time.
4. Avoiddroppingit.NEVERtrytodismantleit.
5. AlwayskeeptheMobiGo
®
2 away from water.
6. Please regularly examine the transformer, checking for damage to the cord, plug,
transformer or other parts. Do not use the transformer if there is any damage to it.
WARNING
A very small percentage of the public, due to an existing condition, may experience epileptic
seizures or momentary loss of consciousness when viewing certain types of flashing colors or
patterns. While the MobiGo
®
2 Touch Learning System does not contribute to any additional
risks, we do recommend that parents supervise their children while they play video games. If
your child experiences dizziness, altered vision, disorientation, or convulsions, discontinue use
immediately and consult your physician.
Please note that focusing on an LCD screen at close range and handling video game controls
for a prolonged period of time may cause fatigue or discomfort. We recommend that children
takea15minutebreakforeveryhourofplay.
TroubleshootingTroubleshooting
Before seeking assistance, check the following information.
Problem Possible Reason Solution
LCD display works, but
there’s no sound.
Volume is turned down. Adjustthevolumecontrol.
The headphones are
connected.
Unplugheadphonesfromtheheadphonejack.
LCD display turns
ON
and OFF immediately.
Battery power is low. Replace batteries.
Cartridge not inserted
firmly enough.
Make sure the cartridge is firmly inserted.
No picture (or incorrect
picture) on LCD, and
pressing the
OFF
button has no effect.
Program needs to be
reset.
Disconnect all power supplies (batteries and
adaptor), then reconnect all power supplies.
Unplug the cartridge and check if there’s any
dirt on it. Clean it. Then reinsert the cartridge.
135800 MobiGo2 M 20120510.indd 16 2012-5-30 10:17:16
 previous next