Filter
Top Products
To fast forward or rewind a music track
•
Press and hold down the Next key or the Previous key to fast forward or
rewind until you reach the desired position.
To listen to the FM radio
1
Turn on the headset.
2
Press the Menu key to open the menu.
3
Press the Next key or the Previous key to select .
4
Press the Play key
.
To search for a radio channel
•
When you listen to the FM radio, press and hold down the Next key
or the
Previous key .
To change the radio frequency manually
•
When you listen to the FM radio, press the Next key or the Previous key
to move up or down by increments of 100kHz.
Using your headset with two devices simultaneously
Your headset has two different connection modes: Multipoint mode and Singlepoint
mode. Multipoint mode helps you manage two connections at the same time, for
example, it lets you handle calls from one device and receive text messages from
another. You must switch to Multipoint mode manually after you pair the headset with
a second device successfully. If you stop using one of the two devices, you should
switch manually to Singlepoint mode.
The headset remembers both paired devices. You can reconnect previously paired
devices easily by switching back to Multipoint mode from Singlepoint mode. A
previously paired device can then be detected automatically.
If your headset is paired with two Android™ devices, you must select one of them as
the primary device for viewing event notifications and handling calls on your headset.
You can only connect to a maximum of two devices in Multipoint mode. If you pair the headset
with a third device, the first paired device gets disconnected.
To manually pair your headset with a second device
•
After manually pairing the first device with your headset, repeat the same
instruction steps that describe how to manually pair your headset with another
device.
To automatically pair your headset with a second device
•
After pairing the first device with your headset automatically, repeat the same
instruction steps that describe how to automatically pair your headset with
another device.
To switch between Multipoint and Singlepoint modes
1
Make sure that your headset is connected to two Bluetooth™ compatible
devices.
2
Press the Menu key
to open the menu.
3
Press the Next key or the Previous key to select , then press the
Select key .
4
Press the Next key or the Previous key to select , then press the
Select key .
5
Press the Next key or the Previous key to select an option, then press
the Select key .
12
This is an Internet version of this publication. © Print only for private use.