Filter
Top Products
11
EN
CT
Getting started
Setting up the PS3™ system
Step 4: Connect the AC power cord
Connect the AC power cord.
Caution
• Do not plug the AC power cord for the system into an electrical outlet until
you have made all other connections.
• The socket-outlet shall be installed near the equipment and shall be easily
accessible.
• If the supplied AC power cord includes a ground wire, follow the steps
below.
– Before plugging the AC power cord into the electrical outlet, be sure to
connect the ground wire fi rst.
– If the ground wire is not connected, it may cause electrical shock. If the
wire cannot be connected, contact an electrician to complete this step.
– When removing the AC power cord from the outlet, be sure to remove
the ground wire as the last step.
AC IN connector
AC power cord (supplied)
To the electrical outlet
Step 5: Perform initial setup of the system software
After turning on the system, perform initial setup.
1 Turn on the TV.
2 Turn on the main power switch.
Main power switch
The power indicator turns solid red to indicate that the system has entered
standby mode.
3 Touch the power button.
Power button
Power indicator
The power indicator turns green and the picture is displayed on the TV
screen.