Filter
Top Products
17
US
Preparation
Part names and functions
1 L button
2 Display button
Press and release
Each time you press the display
button, the display changes among
three levels of screen brightness. The
highest level (level 4) can be selected
only while the PSP
® system is
plugged in using the AC adaptor.
Press for more than one second
The backlight turns off and the screen
goes blank. To turn the backlight on
again, press any of the PSP
® system
buttons.
Press for more than five seconds
The system switches to video output
mode. Video output mode is available
only when a video output cable is
connected (
page 38).
3 Volume − button
4 Volume + button
5 Sound button
Press and release
Each time you press the sound
button, the tone changes among
HEAVY
POPS JAZZ
UNIQUE
OFF.
The tone can be changed only when
using headphones. Furthermore, the
tone setting is temporarily set to
[OFF] during gameplay.
Press for more than one second
The sound is muted. To clear muting,
press the sound button again.
Press for more than five seconds
While the Bluetooth
® indicator is lit
solid or flashing blue, audio from the
system is output to the Bluetooth
®
audio device that is registered, or
paired, with the system. To stop
output to the Bluetooth
® audio
device, press the sound button again
for more than five seconds.
6 LCD screen
7 R button
8 Bluetooth® indicator
Shows the status of the Bluetooth®
connection
Solid blue
Connected
Flashing blue
Connecting
Light off
Not connected
9 POWER indicator
Solid green
Power on
Solid orange
Charging
Flashing green
Charge level low
Light off
Power off/In sleep mode
10
POWER/HOLD switch
Slide up
Turn the system on and off (
page
23).
Slide down
Lock the system buttons.
11
Headset connector
12
Multi-use connector
Connect cables of various types
including a USB cable (supplied) or a
video output cable (sold separately).