Operating the RC-53D K-NET™ Auxiliary Control Panel
9
9
7 Operating the RC-53D K-NET™ Auxiliary Control Panel
In the following example
1
(illustrated in Figure 9), the auxiliary control panel is
labeled with specific functions and each button is programmed
2
to perform several
tasks
3
as defined in Table 4.
Table 4: The Commands Configuration
The Label The Macro Sequence
Figure 9: RC-53D Labels Setup
ON
• Power up the projector
• Power up the DVD player
• Roll down the projector screen
• 1 minute delay (for the projector to heat up)
• The projector selects the DVD input
OFF
• Power down the projector
• Stop the DVD player
• Power down the DVD player
• Stop the VCR
• Power down the VCR
• Roll up the projector screen
DVD
• Stop the video player
• The projector selects the DVD input
• Play the DVD
VCR
• Stop the DVD
• The projector selects the VCR input
• Play the VCR
VOLUME
• Use the VOLUME knob to adjust the audio
level
1 This is only one example among numerous possibilities, each button can be programmed as required. In this example, two buttons are
not assigned
2 By the technical installer
3 A macro sequence, including several commands per button, carried out one after the other