Filter
Top Products
professional control surfaces
Artist Series
Artist Series
EuCon APPLICATION SETUP GUIDE
MACKIE CONTROL
19
5.3 Digital Performer
Before proceeding, you must already have completed the steps described in
Setting Up EuCon for Mackie Control on page 14.
To finish the configuration:
1. Open Applications->Utilities->Audio MIDI Setup and select the MIDI Devices
tab (Figure 5-6).
Figure 5-6 Audio MIDI Setup
2. Click Add Device, double-click the device that appear in the Audio MIDI Set-
up dialog, and assign a device name, such as MCU1.
There is no need to modify the manufacturer, model or any other fields.
3. Repeat so there are four Mackie Controls.
4. In Digital Performer select Control Surface Setup from the Setup menu.
5. Configure the dialog settings as they appear in Figure 5-7.