Filter
Top Products
3.2 Windows 2K and XP
17
Before plugging in the hardware:
Use the supplied install CD and run the setup program. This will
copy all the required files and drivers to your PC.
After running the setup program:
Insert the USBscope50 into a free USB socket, or into a USB hub
port. A USB extension cable can be used if needed.
During installation, two
hardware devices are detected: The
“USBscope50 Composite Device” first, followed by the
“USBscope50” itself. It is vital to complete the installation of
both devices
18
. After installation the device manager will look like
this
19
:
17
Include Language variants using the DBCS character mappings e.g. Chinese, Japanese, Korean etc
18
If Windows prompts to search the Internet for a driver, select “Not
this time”, and when it warns about Unsigned Drivers you MUST
click on “Continue Anyway”
19
The COM port number will be platform specific, this is just and example
Elan Digital Systems Ltd. 34 USBscope50 USER’S GUIDE Iss5