Filter
Top Products
13
VERIFY CONNECTION
To verify connection from Cable or PIN Association, you can open the Wireless USB host manager utility
and you should have an icon displayed representing the TruLink Wireless VGA Device Adapter.
W
IRED MODE
Your Wireless VGA Adapter can also be used wired mode.
1. Position the WIRELESS/WIRED switch in the WIRED position.
2. Plug the USB cable between your computer and the Wireless VGA Device Adapter. If not already
installed, Windows will automatically install the necessary drivers.
3. If prompted to Accept Association, please do so, and then disconnect the USB cable. The function is
the same as the wireless mode but data will be transferred through the USB cable and not use the
Wireless USB host adapter. You are now ready to use your TruLink Wireless VGA Device Adapter.
SOFTWARE/DEVICE INSTALLATION