Filter
Top Products
MEMORY CARD slot 1
MEMORY CARD slot 2
USB connector
controller port 1
controller port 2
disc tray
RESET button
OPEN button
*
Note: Illustration may not match all
PlayStation 2 console types. For owners of
SCPH-70000 series PlayStation 2 systems, refer
to the setup instructions supplied with your system.
Set up your PlayStation
®
2 computer entertainment system
according to the instructions in its Instruction Manual. Make sure
the MAIN POWER switch (located on the back of the console) is
turned ON. Press the RESET button. When the power indicator
lights up, press the OPEN button and the display will open. Place
the Disney’s Chicken Little disc on the disc tray with the label
side facing up. Press the OPEN button again and the disc tray will
close. Attach game controllers and other peripherals, as
appropriate. Follow on-screen instructions and refer to this
manual for information on using the software.
Move
Left Analog Stick
Rotate Camera
Right Analog Stick
Jump / Menu Select
s
Attack
f
Sling Shot
a
Previous Menu
d
Pause
START
Browse Menu
Directional Buttons
• This game supports the analog mode and the vibration feature of the DUALSHOCK®
analog controller.
• To use the vibration feature, turn on VIBRATION under OPTIONS (see page 9).
• You cannot use the ANALOG mode button to switch between the analog and digital modes.
The controller will always be in analog mode (the mode indicator will be red).
• This software is designed exclusively for the DUALSHOCK® analog controller. Its
operation is not guaranteed for use with any controller other than the DUALSHOCK®
analog controller.
DUALSHOCK
®
2 ANALOG CONTROLLER CONFIGURATIONS
button
button
button
button
directional
buttons
left analog stick
(L3 button when pushed down)
SELECT button
ANALOG mode button
START button
right analog stick
(R3 button when pushed down)
L2 button
L1 button
R2 button
R1 button