Filter
Top Products
15
n52te
Table of Contents SECTIONS 1 2 3 4 5 6 7 8
FIRMWARE UPDATES
Update Instructions
Caution: Please read and follow these steps carefully to avoid losing
your custom configurations and risking permanent damage to your
n52te!
1. Make sure the n52te is disconnected from your PC.
2. The firmware updater will not function without the n52te drivers
installed. If you have not installed the n52te drivers, please do so
BEFORE updating the n52te firmware.
3. After driver installation has finished, make sure to reboot your PC
when prompted. (Important: Your n52te will be reset to its factory
default settings. Any custom configuration currently loaded in the
onboard memory will be erased during the firmware update process.
Make sure your custom configurations are backed up as profiles
before updating the firmware.)
4. Connect your n52te. Please allow some time for Windows to
recognize and initialize the n52te.
5. Run the n52te firmware updater and click “OK” to begin the update
process. (Important: To avoid permanent damage to your n52te,
make sure NOT to disconnect or interrupt power during the update
process.)
6. When the update process has finished, disconnect and then
reconnect your n52te, only when prompted to do so by the firmware
updater.
7. If the update process fails, disconnect the n52te and reboot your PC.
Then try updating again from a different USB port, preferably one that
is physically located on the PC or Mac computer.
To ensure you have the absolute best and most complete user
experience, we suggest that you keep your n52te firmware up to date as
often as possible. To check for the latest driver and firmware updates,
please go to www.n52te.com.