A SERVICE OF

logo

Printer Installation
Complete Printer Installation
980504-001 Rev. A P120i Card Printer User Guide 29
4. Insert the power supply plug into the power socket, attach the power cord (120VAC or
230VAC) to the power supply, then plug the power cord in to a grounded electrical socket
of the proper voltage and type.
5. Attach USB cable to printer and computer.
Caution • Intermittent or unpredictable operation may occur from unsecured
connectors. If damaged, the power cable must be replaced by an
exact equivalent. The socket should always be easily accessible
to power off the printer.
115 VAC
230 VAC