Unpacking and Inspection
Inspect the printer for possible damage incurred during shipment.
n
Check all exterior surfaces.
n
Raise the media access door and inspect the media compartment.
In case shipping is required, save the carton and all packing material.
Contact your authorized Zebra reseller for instructions.
Reporting Damage
If you discover shipping damage:
n
Immediately notify and file a damage report with the shipping company.
Zebra Technologies Corporation is not responsible for any damage
incurred during shipment of the equipment and will not repair this
damage under warranty.
n
Keep the carton and all packing material for inspection.
n
Notify your authorized Zebra reseller.
Storage
If you are not placing the printer into operation immediately, repackage it
using the original packing materials. The printer may be stored under the
following conditions:
n
Temperature: -4° to +140° F (-20° to +60° C)
n
Relative humidity: 5 to 85% non-condensing
2 Zebra XiIII-Series User’s Guide
