O-22
UMAN-CM2/3
Wireless Local Area Network (WLAN)
Printers equipped for Wireless Local Area Network
(WLAN) communications are known as Cameo 3N Net-
work Printers. Cameo 3N printers allow wireless commu-
nication as a node within a local area network, and its
wireless capabilities allow communications from any
point within the LAN’s perimeter. Methods of establishing
communications to the Cameo 3N will vary with each
LAN application.
WARNING: Use of the Cameo 3N will result in exposure to
Radio Frequency radiation. To conform to FCC RF exposure
requirements the printer must be used only in the intended
orientation and in the intended manner.
Cameo 3N printers are
identified by a rectangular
pod on the bottom of the
printer containing the
radio module . The
printer’s serial number
label on the back of the
unit will show the radio
module’s identification
numbers and/or its oper-
ating frequency.
The Cameo 3N is de-
signed to be used with a
shoulder strap and spe-
cially designed soft case,
or with a belt clip. The
printer should always be
oriented so that printed material is transported
away
from
the operator. Avoid prolonged exposure closer than 5 cm.
(2”) to the radiating area around this unit’s antenna.
When the Cameo 3N is used as designed, either the
printer’s soft case or the belt clip will keep the antenna
the FCC mandated distance away from the operator.
RF Antenna area
(Keep a minimum
of 2” (5 cm.) from
body.)
Always orient
printer so paper is
transported away
from your body.
C
AMEO
3N S
AFETY
C
ONSIDERATIONS
