5 - 26
CHAS
FRONT BRAKE AND REAR BRAKE
2. Air bleed:
● Brake system
Refer to “BRAKE SYSTEM AIR
BLEEDING” section in the CHAPTER
3.
3. Inspect:
● Brake fluid level
Fluid at lower level → Fill up.
Refer to “BRAKE FLUID LEVEL
INSPECTION” section in the CHAP-
TER 3.
4. Install:
[Front]
● Diaphragm
● Master cylinder cap 1
● Screw (master cylinder cap) 2
[Rear]
● Diaphragm
● Master cylinder cap 1
● Bolt (master cylinder cap) 2
ACHTUNG:
CAUTION:
After installation, while pulling the lever in
or pushing down on the pedal, check
whether there is any brake fluid leaking
where the union bolts are installed respec-
tively at the master cylinder and caliper.
Å Front
ı Rear
5. Install: (rear brake only)
● Protector 1
● Bolt (protector) 2
Å
T
R
.
.
2 Nm (0.2 m · kg, 1.4 ft · lb)
T
R
.
.
2 Nm (0.2 m · kg, 1.4 ft · lb)
ı
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
