www.xerox.com/Section508 8 of 11
Last Revision: 11/05/08
Criteria Supporting Features Remarks and explanations
which is 48 inches in
length, centered on the
operable control, and at
the maximum protrusion of
the product within the 48
inch length on products
which are freestanding,
non-portable, and
intended to be used in one
location and which have
operable controls.
(j)(2) Products which are
freestanding, non-
portable, and intended to
be used in one location
and which have operable
controls shall comply with
the following: Where any
operable control is 10
inches or less behind the
reference plane, the
height shall be 54 inches
maximum and 15 inches
minimum above the floor.
Not applicable
The product is portable and can be placed on an
appropriate desk or table for use.
(j)(3) Products which are
freestanding, non-
portable, and intended to
be used in one location
and which have operable
controls shall comply with
the following: Where any
operable control is more
than 10 inches and not
more than 24 inches
behind the reference
plane, the height shall be
46 inches maximum and
15 inches minimum above
the floor.
Not applicable
The product is portable and can be placed on an
appropriate desk or table for use.
(j)(4) Products which are
freestanding, non-
portable, and intended to
be used in one location
and which have operable
controls shall comply with
the following: Operable
controls shall not be more
than 24 inches behind the
reference plane.
Not applicable
The product is portable and can be placed on an
appropriate desk or table for use.
Section 1194.31 Functional Performance Criteria – Detail
Back to top
Criteria Supporting Features Remarks and explanations
(a) At least one mode of
operation and information
Some limitations exist There is no alternative to the product touch screen.
